Wrapping should start at the foundation, extending at least an inch past the wall-to-foundation intersection. It should continue upwards like shingle installation, with the higher course overlapping the lower course. According to code, all horizontal seams should be overlapped a minimum of 2 inch, and vertical seams a minimum of 6 inch. Tamlyn requires a minimum 6 inch overlap horizontally and vertically to meet Tamlyn's warranty.

We recommend using commonly available scissors to cut TamlynWrap®.

Finally, the manufacturer-recommended tape should be used to cover tears and holes. We recommend using Cap Fasteners to be used for attaching the housewrap.

Downloadable materials below (PDF Files):